Crystal-litter brands
Provides a technical starting point for a dedicated silica range and controlled sample review.
Silica Gel Cat Litter
Compare Silica Product and Packaging Inputs Before RFQ
Type C wide-pore crystal litter with a published technical specification range.
Direct buyer answer
Use this Type C crystal direction when the range needs a clearly specified silica product and the buyer can evaluate particle distribution, fines, adsorption-related data, handling, and pack presentation together. Confirm the approved sample and 10 L packing basis before comparing quotations.
The official page lists non-spherical Type C wide-pore silica gel, 1-8 mm particles, at least 85% adsorbent capacity, and defined density, pore-volume, moisture, and qualified-size ranges.
Type
Type C Crystal
Size
1-8 mm
Adsorption
≥85%
Pack
10 L
Page Focus
Type C Crystal
1-8 mm
≥85%
Packaging Note
Packaging is coordinated around the confirmed product specification, target channel, private label requirements, and shipping plan.
Buyer Decision Guide
Decide The Channel, Sample, Pack, And RFQ Basis
Use these decision points before comparing quotations. Confirmed product facts remain in the specification section below.
Importers and chains
Useful when product data, retail pack direction, case handling, and loading assumptions need comparison.
Range expansion
The role versus mineral and plant-based litter should be stated before adding another SKU.
| Decision | Buyer Input | Confirm Before RFQ |
|---|---|---|
| Crystal direction | Type, particle range, appearance, and indicator-piece preference if applicable | Approved sample matches the quoted technical basis |
| Sample method | Fines, handling, tracking, and use observations to record | One repeatable comparison method across candidates |
| Retail presentation | 10 L direction, bag structure, label panels, and artwork stage | Final product and pack are approved as one SKU |
| Shipment basis | Quantity, case or outer pack, destination, and shipping basis | Loading assumptions match the final packaging |
Sample Evaluation
Check the same questions
- Record crystal appearance, particle distribution, below-size material, and dust or fines during pouring.
- Use a consistent household-use or laboratory comparison method appropriate to the buyer's decision.
- Compare handling, tracking, odor experience, and visible changes over the same test period.
- Link the approved sample code to the final specification and retail pack artwork.
Packaging & Shipping
State the packing basis
- Use the published 10 L direction as the initial reference, then confirm actual fill and bag structure.
- Provide label language, importer details, barcode, safety or handling text, case count, and carton marks.
- Confirm density, final pack dimensions, quantity, destination, and loading basis before shipment planning.
RFQ Inputs
Include these in the first brief
- Destination market and channel role
- Required crystal and particle direction
- Sample evaluation method and open questions
- Target pack and artwork status
- Case or outer-pack requirements
- Quantity range, destination, and shipping basis
Continue the buying task
Use the decision inside a buyer workflow
Product Decision Factors
Use the verified product direction below alongside the buyer decisions above. Final measurable values remain tied to the approved sample and written specification.
Wide-Pore Crystal Type
The technical description identifies Type C, wide-pore, non-spherical silica gel.
Defined Particle Control
The published qualified-size rate is 90-97% across a 1-8 mm range.
Adsorption Reference
Adsorbent capacity is listed at no less than 85%.
Measured Material Data
Bulk density, pore volume, and loss-on-drying ranges are published for buyer comparison.
Specifications
Review the current product direction below. Final measurable values, tolerances, and packing details are confirmed in the quotation and approved specification.
| Type | Type C / Wide-Pore / Non-Spherical |
|---|---|
| Particle Size | 1-8 mm |
| Below Minimum Size | ≤2.0% |
| Above Maximum Size | ≤1.5% |
| Adsorbent Capacity | ≥85% |
| Qualified Size Rate | 90-97% |
| Bulk Density | 400-450 g/L |
| Pore Volume | 0.76-0.95 mL/g |
| Loss on Drying | 3.82-5% |
| Specification | 10 L |
| Origin | Dalian, China |
Specification Control
Current product parameters
The signed quotation, approved sample, and confirmed specification define the final measurable values and tolerances for each order.
Order Planning
Order Terms At A Glance
Use these figures for initial planning. The signed quotation and sales contract define the final commercial terms.
Commercial Terms
- Minimum Order
- 1 x 20 GP (10 metric tons)
- Lead Time
- Within 20 days after payment
- Payment Terms
- T/T (Telegraphic Transfer)
- Loading Reference
- 10 metric tons per 20 GP
Published figures are planning references. Final commercial terms are confirmed in the quotation and sales contract.
Packaging & Shipping Inputs
The current detail page lists a 10 L specification
Retail bag, carton, and private-label configuration are confirmed against the selected market
Final particle specification and approved sample are referenced in the sales confirmation
Private Label Inputs
Private-label artwork and required label-language coordination
Pack size, case configuration, and shipping-mark review
Final specification, MOQ, lead time, and destination documents confirmed in the quotation
Buyer Resources
Related Reading
Continue with practical guidance on specifications, sampling, packaging, and category planning for this product direction.
Silica Gel Cat Litter Guide
Silica Gel Cat Litter Wholesale: A Buyer's Guide to Crystal Specifications
Read article
Private Label Planning
Original vs Fragranced Bentonite Cat Litter: A Private-Label Buyer's Guide
Read articleFAQ
Practical answers for sampling, specifications, packaging, private label, and order planning.
Which Crystal Litter details should be confirmed before quotation?+
Share the destination market, target specification, pack size, quantity range, private-label needs, and preferred shipping basis so the current offer can be checked accurately.
Can buyers request samples before approving the product?+
Sample availability and freight arrangements are confirmed against the selected specification. Use one agreed test method and retain an approved reference sample before production.
Are the published specifications final for every order?+
They describe the current product direction. The sales confirmation and approved sample define the final specification, packaging, MOQ, lead time, and order terms.
Get In Touch
Send Us an Inquiry
Let's work together
Tell us your target market, quantity range, and product requirement. We will reply with the most relevant options.
- emily@emilypets.com
- Phone
- +86-411-39020511
- +8619164804743
- Address
- 704/705/706 Europark Soho A1, No. 96, Changjiang East Road, Zhongshan District, Dalian, China