Natural-litter distributors
Adds a wood-based non-clumping format with a distinct use method and range role.
Litière de pin pour chat
Decide the Role of Pine Litter in Your Assortment
Non-clumping pine pellets for natural cat-litter ranges and double-layer litter box use.
Direct buyer answer
Choose this non-clumping pine pellet direction when your assortment can clearly explain double-layer litter box use and the role of a wood-based format. Confirm pellet dimensions, breakdown behavior, pack weight, instructions, and loading assumptions before positioning it beside clumping litter.
The official specification lists pine wood, wood fiber, or mixed wood feedstock. Pellets break down into powder after absorbing liquid, so the range is positioned for double-layer litter boxes.
Material
Pine / Wood Fiber
Diameter
4-8 mm
Moisture
≤10%
Type
Non-Clumping
Page Focus
Pine / Wood Fiber
4-8 mm
≤10%
Packaging Note
Packaging is coordinated around the confirmed product specification, target channel, private label requirements, and shipping plan.
Buyer Decision Guide
Decide The Channel, Sample, Pack, And RFQ Basis
Use these decision points before comparing quotations. Confirmed product facts remain in the specification section below.
Specialty pet retailers
Works best where staff and packaging can explain double-layer litter box use clearly.
Mass retail
Consumer instructions and differentiation from clumping products need extra attention.
| Decision | Buyer Input | Confirm Before RFQ |
|---|---|---|
| Range role | Natural alternative, specialist SKU, or value format | Clear reason to list it beside clumping litter |
| Pellet specification | Diameter, length, material, moisture, and pack reference | Selected sample matches the written product direction |
| Use instructions | Target consumer and litter-box format | Packaging explains non-clumping breakdown and double-layer use accurately |
| Pack and loading | Retail or bulk pack, case configuration, and destination | Final net weight and shipment basis are quoted together |
Sample Evaluation
Check the same questions
- Measure pellet appearance, diameter, length distribution, breakage, and visible fines.
- Compare liquid absorption and pellet breakdown using one documented method.
- Review odor, dust during pouring, tracking, and ease of separating used material in a double-layer tray.
- Confirm consumer instructions using the approved sample and selected pack format.
Packaging & Shipping
State the packing basis
- Select from the published 4 kg, 8 kg, 15 kg, or 25 kg references before custom pack discussion.
- Confirm bag material, net weight, instructions, label panels, case or outer-bag format, and shipping marks.
- Check loading and handling assumptions against pellet density, final packaging, and destination requirements.
RFQ Inputs
Include these in the first brief
- Destination market and intended channel
- Role in the current litter assortment
- Pellet and sample evaluation priorities
- Retail or bulk pack direction
- Instruction and label-language requirements
- Quantity range, destination, and shipping basis
Continue the buying task
Use the decision inside a buyer workflow
Product Decision Factors
Use the verified product direction below alongside the buyer decisions above. Final measurable values remain tied to the approved sample and written specification.
Non-Clumping Format
Pellets turn into powder after liquid contact and are intended for a double-layer litter box.
Published Particle Range
The official detail lists 4-8 mm diameter and 30-50 mm pellet length.
Controlled Material Data
Moisture is listed at no more than 10%, with ash content at no more than 0.7%.
Multiple Pack References
The current product page lists several retail and bulk weight directions for buyer review.
Specifications
Review the current product direction below. Final measurable values, tolerances, and packing details are confirmed in the quotation and approved specification.
| Raw Material | 100% Pine Wood / Wood Fiber / Mixed Wood |
|---|---|
| Diameter | 4-8 mm |
| Length | 30-50 mm |
| Ash Content | ≤0.7% |
| Moisture | ≤10% |
| Bulk Density | 600-750 kg/m³ |
| Pack References | 4 kg / 8 kg / 15 kg / 25 kg |
| Origin | Dalian, China |
Contrôle des spécifications
Paramètres actuels du produit
Le devis signé, l'échantillon approuvé et la spécification confirmée définissent les valeurs mesurables et tolérances finales de chaque commande.
Planification de commande
Order Terms At A Glance
Utilisez ces chiffres pour la planification initiale. Le devis signé et le contrat de vente définissent les conditions commerciales finales.
Conditions commerciales
- Minimum Order
- 1 conteneur 20 GP (18 tonnes)
- Lead Time
- Sous 20 jours après paiement
- Payment Terms
- T/T (virement télégraphique)
- Loading Reference
- 18 tonnes par conteneur 20 GP
Les chiffres publiés servent de référence de planification. Les conditions commerciales finales sont confirmées dans le devis et le contrat de vente.
Packaging & Shipping Inputs
Official pack references: 4 kg, 8 kg, 15 kg, and 25 kg
PP bag, paper bag, carton, and bulk packing are confirmed against the current quotation
Final net weight and loading plan are approved before artwork production
Private Label Inputs
Private-label artwork and required label-language coordination
Pack size, case configuration, and shipping-mark review
Final specification, MOQ, lead time, and destination documents confirmed in the quotation
Ressources pour acheteurs
Lectures associées
Poursuivez avec des conseils pratiques sur les spécifications, l'échantillonnage, l'emballage et la planification de catégorie pour cette orientation produit.
Pine Cat Litter Guide
Pine Cat Litter Wholesale: A Buyer's Guide to Pellets and Private Label
Read article
Private Label Planning
Original vs Fragranced Bentonite Cat Litter: A Private-Label Buyer's Guide
Read article
Packaging Quality Control
Cat Litter Packaging Quality Control: Seal, Barcode, Carton, and Approval Checks
Read articleFAQ
Practical answers for sampling, specifications, packaging, private label, and order planning.
Which Pine Litter details should be confirmed before quotation?+
Share the destination market, target specification, pack size, quantity range, private-label needs, and preferred shipping basis so the current offer can be checked accurately.
Can buyers request samples before approving the product?+
Sample availability and freight arrangements are confirmed against the selected specification. Use one agreed test method and retain an approved reference sample before production.
Are the published specifications final for every order?+
They describe the current product direction. The sales confirmation and approved sample define the final specification, packaging, MOQ, lead time, and order terms.
Contactez-nous
Envoyez-nous une demande
Travaillons ensemble
Indiquez votre marché cible, votre fourchette de quantité et vos besoins produit. Nous vous répondrons avec les options les plus pertinentes.
- emily@emilypets.com
- Phone
- +86-411-39020511
- +8619164804743
- Adresse
- 704/705/706 Europark Soho A1, No. 96, Changjiang East Road, Zhongshan District, Dalian, China